GZPK 720 -Rotary Tablet Pill Press Machine For Chemical Electronic Industries 5500kg for high capacity tablet production
|Place of Origin:||CHINA|
|Brand Name:||HUALIAN YIMIN|
Payment & Shipping Terms:
|Minimum Order Quantity:||1 SET|
|Packaging Details:||standard export wooden case|
|Delivery Time:||60 days|
|Payment Terms:||L/C, T/T, D/A|
|Supply Ability:||50 sets/month|
|The Number Type:||GZPK720||The Punch Number:||83|
|Plate Speed /R.P.M:||8-80||Maximum Tablet Thickness Mm:||8.5|
|Pitch Circle Diameter Mm:||720||E Diameter Of The Punching Rodmm:||19|
|The Diameter Of The Middle Diemm:||24||Maximum Prepressure (KN):||100|
pill press machine,
powder compacting press machine
GZPS-720 Full-automatic Dual-discharge High-speed Tablet Press
Service Conditions of High-speed Tablet Press
The working environment conforms to relevant requirements of GMP specification.
Material Pressing Requirement
· Granule size range: 14-60 meshes, good compressibility and mobility;
· Synthetic medicine starch tablet: the granules should be uniform and not moist;
· the proportion of fine powder (above 60 meshes) in the granules should not exceed one third;
· Traditional Chinese medicine granules: pure extract, semi-extract and raw powder granules should not be moist and should have certain mobility.
· It is suitable for pressing the powder directly. The pressed powder should have certain compressibility and fluidity.
Tablet Form Requirement
Can suppress the ordinary round film, large film, special-shaped film, special-shaped film, single-double-sided lettering tablets.
Power supply Requirement
380V, 50Hz, three-phase five-wire system, no mutual interference between N line and PE line.
Technical Parameters of GZPK Dual-discharge High-speed Tablet Press (GZPK-51/65/83)
|The number type||GZPK720-83|
|The punch number83||83|
|Plate speed /R.P.M||8-80|
|Maximum output (10k/h)||790,000|
|Main motor power (KW)||11|
|Maximum pressure KN (10KN= 0.98t)||100|
|Maximum tablet diameter( mm)||13|
|Maximum tablet diameter(mm)||18|
|Maximum tablet thickness(mm)||8.5|
|Push rod diameter(mm)||19|
|In the mold diameter(mm)||24|
|Maximum prepressure (KN)||100|
|Rotating speed of punch disk / R.P.M||
Cope of Application:
New type rotary tablet press gives you better quality and price, automatic tablet press for pressing granular raw materials into
This machine is a single-press type, continuous automatic tablet press for pressing granular raw materials into tablets. It is mainly used in pharmaceutical industry and also the chemical, food, electronic, plastic and metallurgical industries.
1. The outside part of the machine is fully-enclosed, and it is made of stainless steel, meeting the GMP requirement.
2. It has transparent windows, so that press condition can be observed clearly and the windows can be opened. Cleaning and maintenance are easier
3. The machine can press not only round tablets, but also different geometrical
shape tablets, double-layered and annular tablets; the tablets may have the impressed letters on both sides
4. All the controllers and devices are located in one side of the machine, so that it can be easier to operate
5. An overload unit is included in the system to avoid the damage of the punches and apparatus, when overload occurs
6. The machine's worm gear drive adopts fully-enclosed oil-immersed lubrication with long service-life, preventing cross pollution.
Scope of application:
Tablet press frame for the four-column structure, four columns and the base plate and the roof will form a rigid body, the machine load when the force generated by the offset, low center of gravity, smooth operation.
· Hydraulic system is replaced by high-strength supporting system for maintaining the main pressure and the pre-pressure to completely avoid oil leakage and reduce medicine pollution.
· There is no need to maintain or replace the pressing parts of the punch pin, thus avoiding the cross pollution caused by hydraulic oil leakage and the waste caused by hydraulic oil addition & replacement.
· The pressure can be stably maintained.
· For the lower pressing wheel, motor is adopted to drive worm gear pair to adjust accurately to 0.01mm; position can be directly set in the touch screen, or the preset position parameter can be called for convenient adjustment and material loss reduction in the adjustment process.
Lower Pressing Wheel Mechanism
Punch Disk Structure
· Middle disk is made of 2Cr13 stainless steel and is processed by laser quenching to make the surface hardness above HRC55, thus having good hardness, wear resistance and corrosion resistance.
· Upper and lower punch disks are made of QT600 and the surfaces thereof are coated with nickel-phosphorus for rust protection, so they have good wear resistance and lubrication.
· End face run-out of middle punch disk is less than or equal to 0.03mm.
· The permanent magnetic damper is adopted as the lower punch damper, and the lower punch pin is not contacted withg the damper pin to prolong the service life of the punch pin, and ensure the damping consistence of the lower punch pin, and avoid bounce and free drop of the plunger under high-speed rotation, and reduce rotation noise.
· The upper punch disk is surrounded by a shield, and the air inlet fan is installed at the middle of the roof to keep positive pressure for the upper punch disk and ensure difficult dust entry and convenient cleanin.
1. Tablet weight precision shall be controlled within 2% (the tablet weight precision of the tablet press also depends on a variety of factors, material compressibility, tablet specifications and mold precision, etc.)
2. Thickness control accuracy 0.1mm(the thickness accuracy of the tablet press also depends on a variety of factors, the compressibility of materials, the composition of the tablet, the precision of the mold and the quality of the supporting conditions of the machine, etc.)
3, tablet press high-speed tablet press studio should be closed, no pollution, easy to disassemble, easy to clean, and with dust absorption, self-locking door function. The working surface of the high-speed tablet press is smooth and clean outside, without scratches or rust. The coating color and luster is consistent, does not bubble, does not fall off. The overall use of oil drawing board, smooth, smooth surface; All non - stainless steel parts are polished and electroplated with part Numbers engraved on the surface. External appearance of a piece of refinement.
4. Adopt symmetrical double-side feeding, double-side tablet pressing and double-side tablet design. Both the main pressure and the pre-pressure can reach 100KN, and both the main pressure and the pre-pressure can be detected. The main pressure wheel and the pre-pressure wheel are adjusted by synchronous motor, the adjustment speed is fast and the precision is high. Can reduce the amount of waste due to adjustment.
5. The device is equipped with material level sensor6. The equipment has online sampling function, which can adjust the sampling frequency and sampling amount.7, tick waste function, good film, waste film, sample classification export. Delay during startup or shutdown.